Waterbed Heaters

$149

HEATER 350W
[complete Unit]
suits most types of
waterbeds in Australia
[also see 100W]

HEATER 100W
[complete unit]
suits waterbed types
100mm depth or less
♦ For Tube beds
 
WARNING
Heater under Gel beds will void warranty .The heater is designed for waterbeds Aqua Advance Industries Pty Ltd more!
These heaters are NOT FIIT FOR THE PURPOSE to be used in gel beds This is also stated on the warranty card [see warranty card]
Click for full Warranty
 

4 pin heater plug
Heater plug conection to control
4 pin cresent shape compatable
with all other Aqua Plus heaters
with same pin configuration,
even from decades ago

Spectrum
 
SPACE AGE WATER BED HEATING SYSTEMS
 
♦ PROUD TO BE AUSTRALIAN
♦ AUSTRALIA'S ONLY WATERBED HEATER
♦ EXPORT PRODUCT
♦ INSTRUCTIONS IN SEVERAL LANGUAGES
♦ DOUBLE INSULATED

Spectrum

SENSOR built into cap - Safety cut out
Pad cord length 2850mm approx
Plug to Control 1660mm approx

Box 1980mm x 350mm

Box side view 22mm x 70mm
Total weight of boxed unit 1.890kg

Other dimensions
Control 105mm[L] x 70mm[W] x 45mm[D]
Pad 955mm [L] x 340mm [W]

 

If you have a dispute with a supplier, this web link will give you advice on how to pursue a refund
http://www.accc.gov.au/consumers/consumer-protection/where-to-go-for-consumer-help  


♦ ORDER & INTERNET SALES ♦ HEATER INSTRUCTIONS ♦ INSTALLATION SERVICE ♦ PAST HEATERS ♦ TROUBLE SHOOTING

We Call You Now

Please note that heaters like the one above have been released on the Australian market by a company who did not seek approval from Electrical Authorities. Hence this item was not officially approved. Fair Trading put a stop to this but there are many out there who are unaware. Please return to the supplier involved.

If a item is not approved and there is a burn out issue or a  fire  results, insurance might not cover you.

To be approved the heater pad and the control must have an approval number like
Australian Approval N1637” as on the Aqua Plus Heaters.

 

 heater warning gel beds
Heaters are made for waterbeds only, as their warranty states.

ORDER AND INTERNET SALES TO PURCHASE HEATER
Click on  CONTACT  or Ph 1300 556066  or  SMS  tablet on 0429 0429 13

AQUAPLUS HEATERS ARE VERY RELIABLE HEATERS AND HAVE PROVEN THEMSELVES TIME AND TIME AGAIN
A waterbed success story !

Spotters fee
Dreamlover customers always receive our products at everyday low prices. When you order on the web and find a competitors price has fallen below our every day low price we will match the heater price plus give you a further 10% discount as well. This is not in conjunction with any other offers.

All Customers
Please note that all heater orders require 24 hours to process unless marked urgent and will usually be shipped the following business day. Orders placed on Friday will be shipped the following Monday. Depending on the chosen shipping method, holidays may delay packages by an additional day.

We stand by the products we sell
There are many out there that are still working successfully 18 years on, but for peace of mind :

How to Deal with Heater warranties wherever you are in Australia

aa. Notify us by phone 0429 0429 88, email jawrge@hotmail.com, SMS 0429 0429 13  for best contact times

b. We need you near the heater when calling to confirm your trouble shooting testing accuracy [ see our guide above]

c. Over the phone we will guide you to do a series of tests as in the trouble shooting guide for us to determine the problem.

d. We will then send a replacement part to you by post or other arrangement between us. When you have changed over the faulty part, we then ask you to send back the faulty part so we in turn can claim this with the manufacturer

e. You can come to our shop for a replacement
or
as per warranty card see [ warranty card ] - Defective parts should be returned PREPAID to
AQUA ADVANCE INDUSTRIES PTY LTD . P.O. Box 6467 Wetherill Park 2164
or to us

Dreamlover Waterbeds
P.O. Box 1301 br>Slacks Creek 4127
Australia

Installation Service

Professional Installation from $95

We can refill your waterbed with fresh water and shock treatment
OR
Holding MattressSAVE WATER !!!!!!!! NOW
We can pump the water in your mattress to our holding mattress that we treat after every job. We then reverse the water back into your mattres.

1. Saves water.
2. The exact amount of water is back in your bed.
3. Any warmth is also kept.

 

Heater Instructions

[ Holding control with cords hanging down]

1. COLD START Turn dial to warm position and leave till mattress is warm [ie 9am]
2. Then adjust dial to centre position [ie Noon]
3. Re-adjust dial slightly for personal comfort [Suggest 24hrs between readjustments]

1. WARM START Turn dial to center position
[ie Noon]
2. Re-adjust dial slightly for personal comfort [Suggest 24hrs between readjustments]

 

TROUBLE SHOOTING

Make sure the pad is placed in the bed according to instructions.

If you see the indicator light on the dial will be a dull consistant light, no matter where the dial is pointing
A, Check the connection from the pad under the control and make sure the plug is firmly in the control.
B, If A is OK, then the other alternative is the pad is faulty. This is rare.

Checking the dial
A, Start at the right position [ie 3pm, cords hanging down] The light should be totally off
B, Slowly [like the second hand on a clock] turn anti-clockwise to the warm position
C, The light should come on at about the mid [or Noon ] position. The light may also come on before or after the mid position depending on pad temperature D, At the warm position [ie 9am] the light should be steady and bright If bed is cold after checking pad and control. Do a restart see HEATER INSTRUCTIONS

If the light does not work.
1, If pad is not hot then check power (Use other GPO's)
2, Check power board [ In some cases one outlet in board could be faulty
3, Double check 1 & 2
4, Then replace control in nearly all cases If the light is always on then the pad is very cold or control is faulty If light comes on [ie 10am position] close to 9am position then pad is very warm or control is suspect When heater is at temperature the indicator light will flash on and off. This is normal